Salifou Adam A, Mrad H, Erchiqui F, El-sharkawi. (2021). Assessment of ultimate pressure of multistage centrifugal pumps. Ninth International Congress Design and Modelling of Mechanical Systems – Hammamet, Tunisia, Hammamet, Tunisie
Malonda* P. Z., Dituba Ngoma G., Ghié W., Erchiqui F., Kabeya P. (2021). Characterization of a Vertical Submersible Six-Stage Pump: Accounting for the Induced Forces and Stresses. Proceedings of the 11th International Conference on Simulation and Modeling Methodologies, Technologies and Applications – SIMULTECH, 92-101, 2021
Dituba-Ngoma G., Mohand A., Erchiqui F., Phyton K. (2020). Numerical Study of the Axial and RadialForces, the Stresses and the Strains ina High Pressure Multistage CentrifugalPump’. 10th International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH), Paris, France. SIMULTECH,
Bioud A., Erchiqui F., Slaoui-Hasnaoui F. (2020). Optimisation de chauffage infrarouge d’une structure thermoplastique courbée à l’aide du recuit simulé. 11ème édition: Jet-2020 : Sciences et Technologies : Mécaniques et des matériaux au coeur du Développement Durable, Marrakech, Maroc
Ben Aoun N., Erchiqui F., Dituba-Ngoma G., Ben Hamou K., Kaddami H. (2020). Experimental andnumerical characterization of the viscoelastic behaviour of a HDPE membraneunder the combined effect of temperature and gravity for thermoformingapplications. PPS36 Conference of the Polymer Processing Society, Montréal, Canada
Kaddami H., Elbousti Z., Rhouta B., Benhamou K., Erchiqui F. (2020). Proccessing of new composites aerogelsnanocellulose/clay for biomedical applications. PPS36 Conference of the Polymer Processing Society, Montréal, Canada.
Mrad H., Elsharkawi E., Hammoud R., MacDonald L., Erchiqui F. (2020). Thermal damagedetection of concrete using nonlinear ultrasonic technique. International Conference on Acoustics and Vibration-ICAV’2020, Istanbul, Turquie.
Erchiqui F, Souli M., G. Dituba, Identification viscoélastique des thermoplastiques par les réseaux de neurones pour des applications en thermoformage, 14ème Colloque national en calcul des structures, 13-17 mai (2019), Presqu’Ile de Giens, (France)
Laroche-Carrier N, Dituba-Ngoma G.; Erchiqui F., Kocaef Y., Branching Poisson Process Modelling for Reliability Analysis for Repairable Mechanical System. 9th International Conference on Simulation and Modelling: Methodology, Technology and Application. 29-31 July 2019, Prague (Czech Republic)
Najm Ben Aoun, Fouad Erchiqui, Hatem Mrad, Caractérisation expérimentale et numérique du comportement viscoélastique d’une membrane en PEHD sous l’effet de la température et de la gravité. 5th International Conference on Biobased Materials and Composites ICBMC’19, mars 17 – 20, Monastir (Tunisia)
Laroche-Carrier N, Dituba-Ngoma G.; Erchiqui F., Kocaef Y.,. (2019). Branching Poisson Process Modelling forReliability Analysis for RepairableMechanical Systems. 8ème International conference on simulation and modelling: Methodology, Technology and Application, Prague, Tchèque, République
Khaled Zaafrane, Fouad Erchiqui, Hyperelastic characterization of circular nanocomposite membrane under free inflation technique. 5th International Conference on Biobased Materials and Composites ICBMC’19, mars 17 – 20, Monastir (Tunisia)
Cherif Ben Romdhane M,, Mrad H., Erchiqui F. (January, 2019), Thermomechanical study and fracture properties of Silicon wafer under effect of crystal orientation, International Conference on Manufacturing Technologies ICMT’2019, San Francisco (USA)
Tazi M., Youssfi R, Erchiqui F., (25 July 2018), Characterization of viscoelastic of wood polymer composite as function of temperature, 15th International Symposium on Bioplastics, Biocomposites and Biorefining (ISBBB 2018), Guelph, (Canada)
Bachir Cherif K., Rebaine D., Erchiqui F., Issouf F (2018), MBO applied to the thermoforming process with convection and conduction considerations, Colloque sur l’optimisation et les systèmes d’informations, COSI’2018, Oran (Algeria)
Dituba-Ngoma G, La Roche-Carrier, Erchiqui F (2018), Branching Poisson Process Modelling for Reliability Analysis for Repairable Mechanical Systems, 8ème International conference on simulation and modelling: Methodology, Technology and Application. Port (Portugal).
Bachir Cherif K., Rebaine D., Erchiqui F., Issouf F (2018), Uniform distribution with MBO method f the infrared radiative energy in the thermoforming process of an ABS sheet, Groupe d’études et de recherche en analyse des decisions: Optimisation combinatoire, Combinatoire, Théorie des graphes: Serie GERAD : G-2018-73
Baatti* A., Erchiqui F.; Bébin P.; Godard F.; Bussières D. (Août 2017). Effect of surface modification of cellulose nanocrystals on mechanical properties of thermoplastic-based nanocomposites. International Conference on Structural Integrity and Durability 2017, Dubrovnik, Croatia.
Bachir Cherif* K.; Rebaine J.; Erchiqui F., Fofana I. (Juillet 2017). Heuristic Approach to Distribute Uniformely the Infrared heating in the thermoforming process. 21st Conference on international federation of Operational Research Societies (IFORS), Québec, Canada,
La Rocher-Carrier* N.; Dituba Ngoma G.; Erchiqui F., Hamani I. (Juillet 2017). Investigation of three Immiscible Fluids in a Microchannel Accounting for the Pressure Gradient and the Electroosmotic flow. 7th International Conference on Simulation and Modeling Methodologies, Technologies and Applications, Madrid, Espagne.
Rebaine D.; Bachir Cherif* K; Erchiqui F.; Fofana I. (Juin 2017). Metaheuristics to solve the Infrared Heating Problem in the thermoforming process. New and Smart Information and Communication Science and Technology (NICST’2017), Clermont Ferrand, France
Sukiman* S. M.; Kanit T.; Imad A.; Erchiqui F. (Avril 2017). Effective properties of randomly oriented short and long fiber cases.13ème Congrès de mécanique, Meknès, Maroc.
Hamani* I.; Erchiqui F.; Dituba-Ngoma G. (Mars 2017). Infrared heating modeling of the PET-Hemp fiber composites sheets in thermoforming process. 4th International conference on biobased Materials and composites, Nantes, France.
Fotso-Talla* A. S.; Erchiqui F.; Kaddami H. (Mars 2017). Poly(ethylene-Terephthalate) Reinforced with hemp fibers: elaboration, characterization and potential application in thermoforming process. 4th International conference on biobased Materials and composites, Nantes, France.
Baatti* A.; Erchiqui F.; Bébinc P.; Godard F.; Kaddami H. (Mars 2017). Thermomechanical behavior of polymethylsilsequioxane nanoparticles reinforced HDPE Nanocomposite. 4th International conference on biobased Materials and composites, Nantes, France.
Sukiman* M. S.; Kanit T.; Imad A.; Erchiqui F. (Mars 2017). Effective thermal and mechanical properties of randomly oriented short and long fibre composites. 4th International conference on biobased Materials and composites, Nantes, France.
Baattia* A., Erchiqui F.; Bébin P.; Godard F.; Bussières D. (Mars 2017). A two-step Sol-Gel method to synthesize a ladder polymethylsilsesquioxane nano-particles and Composites. International Conference of Biobased Materials, Nantes, France.
Baatti A*.; Erchiqui, F.; Bébin, P.; Godard, F.; Bussières, D. (Septembre 2016). Thermo mechanical behavior of Polymethylsilsesquioxane-HDPE nanocomposites. 19th International Conference on Composite Structures (ICCS19), Porto, Portugal.
Hamani* I., Erchiqui F., Dituba-Ngoma G.; Imad A. (Mars 2016). Numerical modeling of infrared heating step for thermoforming PET-Hemp biocomposites. 19th International Conference on Composite Structures (ICCS19), Porto, Portugal.
Hamani* I., Erchiqui F., Imad A., Slaoui-Hasnaoui F. (Mai 2016). Modélisation numérique de l’étape de chauffage infrarouge en thermoformage des biocomposites PET-Chanvre. The International congress for applied mechanics, Hammamet, Tunisie.
Baatti A*.; Erchiqui, F.; Bébin, P.; Godard, F.; Bussières, D. (2016). Rheological behavior of Polymethylsilsesquioxane Nanoparticules Reinforce HDPE Nanocomposite., NANO 2016, Québec, Canada.
Bachir Cherif* K, Rebaine D., Erchiqui F., Fofana I. (Mars 2016). Metaheuristics as a solving approach for the infrared heating in the thermoforming process. 30th conference of the Belgian Operational Research Society, CORE, Louvain-La-Neuve, Belgium
Bachir Cherif* K.; Rebaïne D.; Erchiqui F.; Fofana I. (December 2015). Metaheuristics as a solving approach for the infrared heating in the thermoforming process. GERARD-G-2015-139/Research in decision analysis, Montreal, Canada.
Rebaine D; Bachir Cherif* K; Erchiqui F.; Fofana I. (Juillet 2015). Migrating Bird Optimization Approach for the Infrared Heating Problem in Thermoforming. 27th European conference on operational research, Glasgow, Royaume-Uni.
Sukiman* S.; El Moumen A.; Kanit T.; Imad A.; Erchiqui F. (Juillet 2015). Random composites without deterministic representative volume element. International conference on mechanics of complex solids and fluids, Lille, France,
Farid* H, Farzaneh M, Saeidi A, Erchiqui F. (Juin 2015). Neural network approach to characterize the atmospheric ice compressive strength. 16 th International Workshop on Atmospheric Icing of Structures (IWAIS 2015), Uppsala, Suede,
Sukiman* S., El Moumen A., Kanit T., Imad A., Erchiqui F. (Juin 2015). Effective properties of composites with long fibres. 18th International conference on composite structures, Lisbon, Portugal.
Tazi* M., Erchiqui F., Kaddami H., Bouazara M., Poaty B. (mai 2015). Evaluation of mechanical properties and durability performance of HDPE-Wood composites. Proceedings of the Polymer Processing Society. 30 International conference of the polymer society (PPS-30), Cleveland, USA.
Tazi* M., Erchiqui F., Godard F., Bouazara M, Poaty B. (2014). Effet du bois sur la biodégradabilité et la stabilité géométrique des composites PEHD-bois. Proceeding. The International congress for applied mechanics, JET’14, Marrakech, Maroc. AF3M, Association Franco-Maghrébine de mécanique, Maroc
Farid* H., Ezzaidi H., Erchiqui F., Elghorba M., Elhad K, Slaoui-Hasnaoui F. (2014). Damage Characterization of a thin plate made of ABS under uniaxial solicitation. 19th International Conference on Composite Materials (ICCM-19), Montréal
Tazi* M., Erchiqui F., Kaddami H., Bouazara M., Poaty B. (2014). Evaluation of mechanical properties and durability performance of HDPE-Wood composites. Proceedings of the Polymer Processing Society. 30 International conference of the polymer society (PPS-30), Cleveland, États-Unis
Erchiqui F.; Rebaine D.; Nahas* N, Bachir Cherif* K.; Slaoui-Hasnaoui F. (2014). A heuristic approach for the infrared heating in thermoforming process,. COSI’2014. Colloque sur l’Optimisation et les systems d’informations, Béjaia, Algérie. COSI, Algérie
Hamani* I., Erchiqui F. (2014). Study of the infrared heating step of a semi-transparent bio-composite material during thermoforming: Case of PET-hemp fibers. International Conference on Biobased Materials and Composites (ICBMC’14), Montréal, Canada
Fotso Talla *A. S, Erchiqui F., Kocaefe D., Kaddami H. (2014). Effect of hemp fiber on the properties of PET/hemp composites. International Conference on Biobased Materials and Composites (ICBMC’14), Montréal, Canada
Tazi* M., Erchiqui F., Kaddami H., Bouazara M., Poaty B. (2014). Evaluation of mechanical properties and durability performance of HDPE-Wood composites. International Conference on Biobased Materials and Composites (ICBMC’14), Montréal, Canada
Bravo* A., Toubal L., Koffi D., Erchiqui F. (2014). Effect of coupling agent on failure of polyethylene birch biocomposites-acoustic;. International Conference on Biobased Materials and Composites (ICBMC’14), Montréal, Canada
Tazi* M., Erchiqui F., Godard F. (2013). Effects of fibre load on the mechanical and thermophysical proprieties of wood-plastic composites. Proceedings of the Polymer Processing Society. 29 International conference of the polymer processing society (PPS-29), Nuremberg, Allemagne.
Koubaa A., Boubtane, Djedidi Z., Erchiqui F. (2013). Dielectric Properties of Wood: Variations and Implications on Heating and Non-Destructive Testing. Second International Conference on Research to Applications & Markets, Sousse, Tunisie,
Fotso-Talla* S., Erchiqui F., Godard F. (2013). Thermal properties and stability of PET-Hemp fibers composites. 19th International conference on composite materials (ICCM-19), Montréal, Canada.
Mijiyawa* F., Koffi D., Erchiqui F., Kokta B. (2013). Beneficial effect of nanoclay and bacterial cellulose on wood plastics composites properties. Proceedings of the Polymer Processing Society. 29 International conference of the polymer processing society, Nuremberg, Allemagne
Bravo* A., Toubal L., Koffi D., Erchiqui F., Kokta. (2013). Endommagement sous solicitations monotone et cyclique d’un composite à matrice thermoplastique renforcée de fibres de bouleau suivi par émission acoustique. Proceeding. 18ème Journées nationales sur les composites, Nantes, France.
Mijiyawa *F., Koffi D., Kokta B., Erchiqui F., Toubal L. (2013). Renforcement des thermoplastiques par les fibres de bois pour une application aux engrenages : prédiction du module élastique en traction. Proceeding. 18ème Journées nationales sur les composites, Nantes, France.
Bravo* A., Toubal L., Koffi D., Erchiqui F., Kokta B. V. (2013). Damage characterization of thermoplastic matrix wood fiber composite using acoustic emission. 5th International Conference on NDT of HSNTIC MINDT-2013, Athens, Grèce. Hellenic Societ of Non-Destructive testing, Grèce
Tazi* M., Erchiqui F., Godard F. (2013). Caractérisation des propriétés mécaniques et thermophysiques des biocomposites (HDPE-bois). Proceeding. 11ème Congrès de Mécanique, Agadir, Maroc.
Farid* H., Elghorba M., Erchiqui F., Chergui M, Elhad K. (2013). Caractérisation de l’endommagement des plaques thermoplastiques minces en ABS sous sollicitation uniaxiale. Proceeding. 11ème Congrès de Mécanique, agadir, Maroc
Soroush* H. A, Erchiqui F., Farzaneh M. (2012). Neural networks approach for characterization of nonisothermal thermoplastic membrane,. Euromembrane, London, Royaume-Uni.
Tazi* M., Erchiqui F., Godard F. (2012). Non-Isothermal rheological characterization of wood composite with thermoforming application. Proceeding. 15th European Conference on Composite Materials, venise, Italie. ECCM15, Italie
Farid* H., El Ghorba M., Erchiqui F., Chergui M. (2012). Caractérisation des membranes composites en grande déformations par un modèle neuronal. Proceeding. 7ème Congrès de l’association Franco-Magrébine de Mécanique et des Matériaux, Marrakech, Maroc.
Mijiyawa* F., Koffi D., Kokto B. V., Erchiqui F. (2012). Combined effects of mixing time, tixing rotation and coupling agent on mechanical properties of polypropylene/Aspen composites. Proceeding. International Conference on Bio-based Materials and Composites, Marrakech, Maroc
Tazi* M., Erchiqui F., Bouazara M., Hilali E., Elminor H., Imad A. (2012). Compative Study of Rheology and Mechanical properties of Biocomposites plastic/Argan Tree. Proceeding. International Conference on Bio-based Materials and Composites, Marrakech, Maroc
Hicham* F., Erchiqui F., Elghorba M. (2012). Behavior and damage of biocomposites membranes in great deformations,. Proceeding. International Conference on Bio-based Materials and Composites, Marrakech, Maroc
Mijiyawa* F., Koffi D., Kokto B. V., Erchiqui F. (2012). Effects of fibers, coupling agent and surface treatment on wettability and mechanical behavior of polypropylene/Aspen composites. Proceeding. International Conference on Bio-based Materials and Composites, Marrakech, Maroc
Fotso Talla* A. S., Erchiqui F., Page J. S. Y. D. (2012). Influence of naturel fiber treatment on both the properties and thermal degradation of high melting thermoplastics reinforced with natural fibers: Case of PET-Hemp composite. Proceeding. International Conference on Bio-based Materials and Composites, Marrakech, Maroc,
Nahas* N. and Erchiqui F. (2011). Metaheuristic algorithms for optimization of infrared heating stage of the thermoforming. International conference of the polymer processing society (PPS-27), Marrakech, Maroc
Kaddami H., Erchiqui F., Raihane M., Lahcini M., Joffe R., Dufresne A.,. (2011). New Biodegradable Nanocomposite Based On Nanoparticule Of cellulose And Polyurethane. Proceeding. International Conference, On Intelligence Textiles and Mass Customization, Casablanca, Maroc
Erchiqui F., Fotso-Talla * A., Pagé D., Bourihane A. (2011). Influence of The Choice of Additives in High Melting Polyesters (HMP) Reinforced With Natural Fibers (NF) in View of Structural Applications. Proceeding. 26th ASC Annual Technical Conference of the American Society of composites, Montréal, Canada
Chaouki* H., Gakwaya A., Fafard M., Erchiqui F. (2011). An Orthotropic Hyperelastic Constitutive Law with Damage for Continuous Fibre Reinforced Thermoplastic Composites: Formulation, Numerical Simulations and Experimental Study. Proceeding. XI International Conference on Computational Plasticity Fundamentals and applications (COMPLAS XI), Barcelona, Espagne
Slaoui Hasnaoui F.,Semaan G., Erchiqui F. (2011). Interpretation of Resistivity Sounding Data for Multi-Vertical Earth Model. IEEE. 21st International conference on system engineering, Las Vegas, USA
Mijiyawa* F., Kokta B. V., Koffi D., Erchiqui F. (2011). Reinforcement of polypropylene-wood fiber nanocomposite by bacteria cellulose : preliminary assessment of the manufacturing and performance. Proceedings of the Polymer Processing Society. International conference of the polymer processing society (PPS-27), Marrakech, Maroc.
Benhamou* K.; Kaddami H.; Erchiqui F., Raihane M.; Lahcini M.; Joffe R. (2011). New biodegradale nanaocomposites based on nanoparticules of cellulose and polyurethane. Proceedings of the Polymer Processing Society. International conference of the polymer processing society (PPS-27), Marrakech, Maroc.
Tazi* M., Erchiqui F., Godard F., Kaddami H.,. (2011). Effect of temperature and concentration of wood sawdust on the rheological properties of wood-plastic composite. Proceedings of the Polymer Processing Society. International conference of the polymer processing society (PPS-27), Marrakech, Maroc.
Erchiqui F.; Tazi* M.; Godard F. (2011). Non-isothermal finite element analysis of free Inflation of flat membrane of HDPE charged by wood flours. Society. International conference of the polymer processing society (PPS-27), Marrakech, Maroc
Tazi* M, Erchiqui F., Godard F., Bourihane A. (2011). Effet de la température sur les propriétés rhéologiques et physico-chimiques des composites plastique-bois. 10ème Congrès de mécanique, Oujda, Maroc. Société marocaine de mécanique, Maroc
Benhamou* K; Erchiqui F.; Dufresne A.; Saouaf N; Lahcin M.; Kaddami H. (2011). Étude comparative de matériaux nanocomposites élaborés à partir de nano-renforts cellulosiques extraits du palmier dattier et de polyuréthane à base de Polycaprolactone. Colloque International sur les Polymères Organiques et leurs Applications, Tanger, Maroc.
Migneaul* S., Koubaa A., Erchiqui F., Chaala A., Englund K., Wolcott M. P.,. (2010). Micromechanical modeling of the tensile strength of wood?polymercomposites. The Fifth International on Advances in Michanical and Michanics (ICAMEM 2010), Hammamet, Tunisie
Chaouki* H., Gakwaya A, Erchiqui F., Fafard M. (2010). A hyperelastic damage model for continuous fiber reinforced thermoplastic composites: formulation and numerical simulation. 24th International conference of the polymer processing society (PPS-24), Banff, Canada.
Annasabi* Z., Erchiqui F., Koubaa. (2010). Étude de chauffage de bois par des ondes électromagnétiques courtes.Proceeding. The International congress for applied mechanics, Marrakech, Maroc
Chaouki* H., A. Gakwaya. M. Fafard, F. Erchiqui. (2009). An orthotropic Hyperelastic damage model for reinforced thermoplastic composites: formulation and computational aspect. Proceedings of the American Society for composites. American Society for composites/24 Technical Conference, Newark, États-Unis.
Chaouki* H., A. Gakwaya. M. Fafard, F. Erchiqui. (2009). Finite element simulation of a thermostamping process of a reinforced thermoplasticcomposite. Proceedings of the American Society for composites. American Society for composites/24 Technical Conference, Newark, États-Unis.
Maniana* M., F. Erchiqui, A. Azim, H. Rhanim. (2009). Fusion d’un bloc solide enaluminium dans un bain liquide du métal chaud. Proceeding. 9ème Congrès de mécanique, Société Marocaine des Sciences Mécaniques, Marrakech, Maroc.
Hamani* I.; Erchiqui F.; Gakwaya A; Dituba-Ngoma G. (2009). Modélisation simplifiée de chauffage infrarouge des membranes thermoplastiques semi-transparentes. Proceeding. 9ème Congrès de mécanique, Société Marocaine des Sciences Mécaniques, Marrakech, Maroc
Migneault* S., Koubaa A., Erchiqui F., Chaala A., Englund K., Wolcott M.P. (2009). Application of micromechanical models tothe tensile properties of wood-plastic composites. Proceedings of the Polymer Processing Society. Polymer processing Society, Larnaca, Chypre
Migneault* S., A. Koubaa, Erchiqui F., A. Chalaa, K. Englund, M. Wolcott. (2008). Effects of Processing Method and Fiber Characteristics on Structure andProperties of Wood Plastic Composites.9th international conference on Flow Processes in composite Materials, Montréal, Canada
Erchiqui F., Godard F., Koubaa A. (2008). Numerical investigation of potentiality of thermoformability of HDPE charged by woodfloors. PPS-24, Polymer processing Societ, Salerno, Italie.
Ngoma G. D., Amsini S., Erchiqui F. (2008). Transient analysis of a liquid flow in microchannel of varying cross-section. 6th International Conference on Nanochannels, Microchannels, and Minichannels. ASME 2008, Darmstadt, Allemagne (467-473).
Koubaa A., Migneault* S., Soucy* J., Erchiqui F. (2008). Properties of Extruded Wood Plastic Composites Made from Pulp Fibers.PPS-24, Polymer processing Society, Salerno, Italie
Erchiqui F. (2007). Modélisation intégrée par la MEF du thermoformage d’une pièce polymérique de type PET: Effet d’un formage incomplet, 18ème Congrès Français de Mécanique, Grenoble, France
Erchiqui F.; Souli M.; A. Alia*. (2007). Modélisation de l’effet d’un gaz réel sur le soufflage libre d’une structure viscoélastique, CD-ROM proceeding. 18ème Congrès Français de Mécanique, Grenoble, France.
Dituba-Ngoma G.; Erchiqui F. (2007). Parameter Study of Liquid Flow and Heat Transfer in a Microchannel of Varying Cross-Section. CD-ROM proceeding. IASTED Symposium Applied Mathematics and Numerical Methods, Montréal, Canada
Dituba-Ngoma G.; Sadiki A.; Erchiqui F. (2007). Time-Dependent Liquid Flow and Thermal Characteristics in a Trapezoidal Microchannel. CD-ROM proceeding. IASTED, Applied Simulation and Modelling, Palma De Mallorca, Espagne.
Chaouki* H.; Erchiqui F.; Gakwaya A.; Fafard M. (2007). A new constituve law for the viscoelastic mediums reinforced by long or continuous fibres at large deformations. CD-ROM proceeding. PPS-23, Polymer processing Society, Salvador, Brésil
Chaouki* H., Erchiqui F., A. Gakwaya M. Fafard. (2007). Nouvelle loi decomportement pour les milieux viscoélastiques renforcés par des fibrescontinues. Volume 1. 8ème Congrès de mécanique, El Jadida, Maroc
Erchiqui F. (2007). Modélisation expérimentale et numérique de l’effet d’une charge de gaz réel de type Redlich-Kwong sur le comportement de membranes viscoélastique dans le procédéde thermoformage. Volume 2. 8ème Congrès de mécanique, El Jadida, Maroc
Makrizi A.; Radi B.; Erchiqui F. (2007). Parallélisation de l’optimisation topologique d’une structure élastique. Volume 1.8ème Congrès Marocain de mécanique, El Jadida, Maroc
Erchiqui F., Radi B., Bagaoui R. (2007). Caractérisation etmodélisation du comportement viscoélastique d’une membrane sous l’action d’unecharge de gaz réel de type Van Deer Waals. Volume 1. 8ème Congrès de mécanique, El Jadida, Maroc
Hamani* I., Erchiqui F., Rhanim H., Azim A. (2007). Modélisation du chauffage infrarouge des membranes thermoplastiques semi-transparentes de type PET par la MEF-3D. Volume 2. 8ème Congrès de mécanique, El Jadida, Maroc
Migneault S., A. Koubaa, Erchiqui F., A. Chaala, K. Englund and M.P. Wolcott. (2007). Effect of fiber length on processing andproperties of wood-plastic composites. 3eme Symposium International sur les Composites Bois Polymères, Bordeaux, France
Erchiqui F.; Dituba-Ngoma G.; Mouloudi* A., Kandil N. (2006). Networks Approach for Characterization of Viscoelastic Polymers. CD-ROM proceedings. Annual Meeting of Polymer Processing Society (PPS-22), Yamagata, Japon
Soucy* J., A. Koubaa, M. Wolcott, K. Englund, and Erchiqui F. (2006). Rheometer Torque properties of Thermoplastic Composites filled withdifferent Pulp Fibers.Proceedings of the Polymer Processing Society. 22 Annual Meeting of Polymer Processing Society (PPS-22), Yamagata, Japon
Erchiqui F.; Gakwaya A.; Souli M. (2006). Non-isothermal Finite Element Analysis of Thermoforming of PolyethyleneTerephthalate Sheet. CD-ROM proceeding. Polymer processing Society, Europe/Africa Meeting, Pretoria, Afrique du Sud
Dituba N. G, Erchiqui F. (2006). Liquid slip and thermal effects on electroosmotic and pressure driven flow in amicrochannel. IASTED-Book. The International Association of Science and Technology for Development (IASTED), Montréal, Canada
Erchiqui F. (2005). No isothermal Hybrid approach using the perfect gas law and explicit dynamic finite element method for the simulation of thermoforming and blow molding processes. ASME 2005 International Mechanical Engineering Congress and Exposition , Orlando/Floride (USA)
Erchiqui F. (2005). Thermodynamical approach using the explicit dynamic finite element forthe simulation of thermoforming and blowmolding processes. 21-Annual Meeting of Polymer Processing Society (PPS-21), Leipzig, Allemagne
Erchiqui F.; Bendada A.; Godard F. (2005). Thermodynamical approach for modeling of free inflation of the closed thin hyperelastic structure. IASTED-Book. 16th IASTED Conference of the International Association of Science and Technology for Development, Cancun, Mexique
Erchiqui F., A. Gakwaya. (2005). Analyse of gas temperature effect during the K-BKZ polymer membraneinflation. Polymer Processing Society, America’s Regional Meeting, Québec, Canada
Dituba N. G., Erchiqui F. (2005). Effect of transient heat load on flow distribution. IASTED-Book. 16th IASTED Conference of the International Association of Science and Technology for Development, Cancun, Mexique.
Erchiqui F., N. G. Dituba, A. Bendada. (2005). Modélisation non isotherme du comportement viscoélastique de membranes dans le procédés dethermoformage. CD-ROM proceeding. 7ème Congrès en mécanique de la Société Marocaine des Sciences Mécaniques, Casablanca, Maroc
Erchiqui F.; Benharbit* M.; N. Kandil. (2005). Caractérisation des membranes thermoplastiques par application de l’approche neuronale de type Back-Propagation et de la méthode des différences finies. 7ème Congrès mécanique de la Société Marocaine des Sciences Mécaniques, Casablanca, Maroc. Société marocaine de mécanique
Nourelfath M.; Erchiqui F. (2004). Optimization of Transfer Lines in Plastic. Volume 1. ANTEC’2004-Society of Plastics Engineering (SPE), Chicago, USA
Erchiqui F., N. Kandil. (2004). Neuronal Networks Application for Characterization of Softened Polymers. Volume 1. Antec 2004-Society of Plastics Engineering (SPE), Chicago, USA
Erchiqui F., A. Gakwaya. (2004). A 3D variational BEM formulation for fluid-structure interaction in viscouscompressible flow. Vol.485/No.1. ASME, The 8th International Symposium on Emerging Technology in Fluids, Structures, and Fluid-Structure Interactions, San Diego (California), USA.
Erchiqui F.; Bendada A.; Gakwaya A.; Kandil N. (2004). Dynamic finite element analysis of the forming process in long fiber reinforced hyperelastic materials. Materials Processing and Design: Modeling, Simulation and Applications. 8th International Conference on Numerical Methods in Industrial Forming Processes, Ohio, USA
Erchiqui F. (2003). Application de la méthode dynamique des éléments finis et la loi des gaz parfaits aux procédés de mise en forme des structures viscoélastiques minces. Tome III. 6ème Colloque national en calcul des structures, Giens, France
Erchiqui F.; Gakwaya A. (2003). Modélisation des interactions fluide-structure par une approche combinant les équations intégrales et la méthode des éléments finis. CD-ROM proceeding. 31 Annual conferences of Canadian Society for Civil Engineering, Moncton (New-Brunswick ), Canada
Erchiqui F., A. Gakwaya, M. Rachik,. (2003). Analysis of gaz pressure effect during the KBK-Z polymer membrane forming using the dynamite finite element method. PPS-2003 Europe/Africa Regional Meeting, The Polymer Processing Society, Athens, Grèce
Erchiqui F. (2003). Modélisation du Comportement des polymères de type KBK-Z dans les procédés de fabrication des pièces creuses minces. Tome I. 6ème Colloque la société marocaine de la mécanique, Tanger, Maroc
Erchiqui F., Derdouri A., Garcia-Réjon A. (2002). Numerical and experimental analysis of the material behavior during a bubble inflationtest. Vol. 1. ANTEC’2002-Society of Plastics Engineering (SPE), San Francisco, USA
Erchiqui F., Garcia-Réjon A., Derdouri A. (2001). Modeling of parison formation in Blow Moulding. PPS-17-Polymer Processing Society, America’s Regional Meeting, Montréal, Canada
Derdouri A., Erchiqui F., A. Bendada, E. Verron, B. Peseux. (2000). Viscoelastic behaviour of polymer membranes under inflation. Volume 3. Rheology’2000-XIII International Congress on Rheology, Cambridge (U.K)
Derdouri A.; Erchiqui F.; Garcia-Réjon A. (1998). Non-linear behaviour of polymeric materials under biaxial deformation. 48th Canadian Chemical Engineering Conference, Toronto (Ontario), Canada
Erchiqui F.; Derdouri A.; Laroche D. (1998). Biaxial Characterization of Softened Polymers. PPS-14-The polymer Processing Society, Toronto (Ontario)
Laroche D.; Erchiqui F. (1998). 3D Modelling of the Blow moulding Process. Numerical Methods in Industrial Forming Processes. International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM’98, Enschede, Irlande
Erchiqui F.; Gakwaya A. (1995). FEM-BEM formulation for fluid-structure interaction. Mécanique des solides, Volume 2. 2ème Congrès de la société marocaine de mécanique, Casablanca, Maroc
Erchiqui F.; Gakwaya A. (1991). A variational symmetric boundary element formulation for fluid structure interaction problems. Proceeding of Boundary element methods in Engineering. 13th International Conference on Boundary element methods in Engineering- BEM 13, Tulsa (Oklahoma), USA
Erchiqui F.; Gakwaya A. (1990). A Symetric variational boundary element formulation for structure interaction problems. La conférence européenne sur les nouvelles avancées en calcul des structures, Giens, France
Charette A.; Erchiqui F.; Kocaefe Y. S. (1987). The imaginary planes method for the radiative heat transfert analysis in furnaces. Chemical Engineering Conference, Montréal, Canada
Laroche D.; A. Charette; Erchiqui* F.; Kocaefe Y.S. (1986). Modèle en deux dimensions pour le calcul simplifié du rayonnement dans les fournaises industrielles.Proceeding of Canadian Conference on Industrial Computer Systems. Canadian Conference on Industrial Computer Systems, Montréal, Canada