Erchiqui F, Amorri* N. (2021). Heating time simulation for frozen Canadian Wood Species by 3D hybrid finite element enthalpy: aspen, white birch, yellow birch and sugar maple. European Journal of Wood and Wood Products (en ligne). https://link.springer.com/article/10.1007/s00107-021-01749-4
Abdelrahman* A, Erchiqui F, M. Nedil, M. Siaj and B. Aïssa. (2021). Electrically conductive PDMS/Clay nanocomposites assembled with graphene, copper and silver nanoparticles for flexible electronic applications. Polymers (révision)
Koffi K., Mijiyawa*F., Koffi D., Erchiqui F., Toubal T. (2021). Mechanical Properties, Wettability and Thermal Degradation of HDPE/Birch Fiber Composite. Polymers. 13(9): 1459. https://www.mdpi.com/2073-4360/13/9/1459
Sukiman* M. S., Kanit T., N’Guyen F., Imad A, Erchiqui F. (2021). On effective thermal properties of wood particles reinforced HDPE composites. Wood Science and Technology (Révision demandée)
Annasabi* Z; Erchiqui F., M. Souli. (2021). Application of the B-Spline method to solve the nonlinear problem of heat conduction with radiation boundary conditions using the Kirchhoff transformation. Journal of Heat Transfer-ASME (Révision demandée)
Erchiqui F., Baatti*, A., Ben hamou* K.; Kaddami H. (2021). Investigation on the use of structural PMSQ-Thermoplastic nanocomposite for the thermoforming of NACA profile for UAVs. Polymers. 13(10): 1622. https://doi.org/10.3390/polym13101622
Arrakhiz F. Z., Ben Hamou* K., Erchiqui F., Hammiche D., Kaddami H. (2021). Development and characterization of hybrid composite laminate based on luffa and glass fibers. Materials Today: Proceedings. 36: 22-28. https://doi.org/10.1016/j.matpr.2020.05.082
Kaddami H., Ezzahra Arrakhiz F., Hafs O., Assimi T., Boulafrouh S., Ablouh E., Man-sori M., Banouni H., Bouzit S., Erchiqui F., Benmoussa K.,. (2021). Implementation ans characterization of a laminate hybrid composite based on palm tree and glass fibers. Polymers. 13(19): 3444. https://doi.org/10.3390/polym13193444
Liu Chong*; Cheng L., Chouteau M., Erchiqui F. (2021). 3D Gauss-Newton inversion of surfaceboreholeTEM data. Geophysics (Révision demandée)
Erchiqui F, Annasabi* Z, Daigne M. (2021). Investigation of the radiofrequency heating of anisotropic dielectric materials with a phase change: application to frozen Douglas fir and white Oak woods. Wood Science and Technology (in press)
Erchiqui F; Annasabi* Z.; Kaddami H.; Ben Hamou* K, G.Dituba-Ngoma. (2020). Effect of the cooling temperature of a PET sheet on the crystallinity and mold removal time. Canadian Journal of Chemical Engineering. 60(11): 2676-2684. https://doi.org/10.1002/cjce.23906
Sukiman, M. S., Erchiqui, F., Kanit, T., & Imad, A. (2020). Design and numerical modeling of the thermoforming process of a WPC based formwork structure. Materials Today Communications, 22, 100805. https://doi.org/10.1016/j.mtcomm.2019.100805
Erchiqui F., Kaddami H., Dituba-Ngoma G., F. Slaoui-Hasnaoui (2020), Comparative Study the Use of Infrared and Microwave Radiation in the Heating Stage of the Thermoforming of Wood-Plastic Composite Sheets, Chemical Engineering Science
Annasabi Z. & Erchiqui F. (2020), 3D Hybrid Finite Elements for Anisotropic Heat Conduction in a Multi-material with Multiple orientations of the thermal conductivity tensors, International Journal of Heat and Mass Transfer
Annasabi Z. & Erchiqui F. (2020), Robust Kirchhoff transformation using B-Spline for Finite Element Analysis of the non-linear heat conduction, International Journal of Heat and Mass Transfer
Erchiqui F., Kaddami H, Slaoi-Hasnaoui-F., Koubaa A.(2020), 3D Finite Element Enthalpy Method for Analysis of Phytosanitary Treatment of Wood by Microwave, European Journal of Wood and Wood Products
Erchiqui, F., & Annasabi, Z. (2019). 3D hybrid finite element enthalpy for anisotropic thermal conduction analysis. International Journal of Heat and Mass Transfer, 136, 1250-1264. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2019.02.096
Baatti, A., Erchiqui, F., Bébin, P., Godard, F., & Bussières, D. (2019). Fabrication of hydrophobic cellulose nanocrystals. Canadian Journal of Chemical Engineering, 97(7), 2050-2060. doi:https://doi.org/10.1002/cjce.23473
La Roche-Carrier, N., Dituba Ngoma, G., Kocaefe, Y., & Erchiqui, F. (2019). Reliability analysis of underground rock bolters using the renewal process, the non-homogeneous Poisson process and the Bayesian approach. International Journal of Quality & Reliability Management. doi:https://doi.org/10.1108/IJQRM-01-2019-0035
Baatti, A., Erchiqui, F., Godard, F., Bussières, D., & Bébin, P. (2019). DMA analysis, thermal study and morphology of polymethylsilsesquioxane nanoparticles-reinforced HDPE nanocomposite. Journal of Thermal Analysis and Calorimetry, 1-9. doi:https://doi.org/10.1007/s10973-019-08497-x
Erchiqui, F. (2018). Application of genetic and simulated annealing algorithms for optimization of infrared heating stage in thermoforming process. Applied Thermal Engineering, 128, 1263-1272. doi:https://doi.org/10.1016/j.applthermaleng.2017.09.102
Bravo, A., Toubal, L., Koffi, D., & Erchiqui, F. (2018). Gear fatigue life and thermomechanical behavior of novel green and bio-composite materials VS high-performance thermoplastics. Polymer Testing, 66, 403-414. doi:https://doi.org/10.1016/j.polymertesting.2016.12.031
Hamou, K. B., Kaddami, H., Dufresne, A., Boufi, S., Magnin, A., & Erchiqui, F. (2018). Impact of TEMPO-oxidization strength on the properties of cellulose nanofibril reinforced polyvinyl acetate nanocomposites. Carbohydrate Polymers, 181, 1061-1070. doi:https://doi.org/10.1016/j.carbpol.2017.11.043
Cherif, K. B., Rebaine, D., Erchiqui, F., Fofana, I., & Nahas, N. (2018). Numerically Optimizing the Distribution of the Infrared Radiative Energy on a Surface of a Thermoplastic Sheet Surface. Journal of Heat Transfer, 140(10), 102101. doi:https://doi.org/10.1115/1.4039990
Tazi, M., Erchiqui, F., & Kaddami, H. (2018). Influence of SOFTWOOD-fillers content on the biodegradability and morphological properties of WOOD–polyethylene composites. Polymer Composites, 39(1), 29-37. doi:https://doi.org/10.1002/pc.23898
Farid, H., Saeidi, A., Farzaneh, M., & Erchiqui, F. (2018). An atmospheric ice empirical failure criterion. Cold Regions Science and Technology, 146, 81-86. doi:https://doi.org/10.1016/j.coldregions.2017.11.013
Sukiman, M. S., Kanit, T., N’Guyen, F., Imad, A., Moumen, A. E., & Erchiqui, F. (2017). Effective thermal and mechanical properties of randomly oriented short and long fiber composites. Mechanics of Materials, 107, 56-70. doi:http://dx.doi.org/10.1016/j.mechmat.2017.02.002
Baatti, A., Erchiqui, F., Bébin, P., Godard, F., & Bussières, D. (2017). A two-step Sol-Gel method to synthesize ladder polymethylsilsesquioxane nanoparticles. Advanced Powder Technology, 28(3), 1038-1046. doi:https://doi.org/10.1016/j.apt.2017.01.009
Erchiqui, F., Fotso Talla, A. S., & Kaddami, H. (2016). A numerical investigation of the use of novel melt processed PET-hemp fiber composites for thermoforming applications. Polymer Engineering and Science, 56(9), 1021-1030. doi:https://doi.org/10.1002/pen.24332
Fotso Talla, A. S., Erchiqui, F., Godard, F., & Kocaefe, D. (2016). An evaluation of the thermal degradation kinetics of novel melt processed PET–hemp fiber composites. Journal of Thermal Analysis and Calorimetry, 126(3), 1387-1396. doi:https://doi.org/10.1007/s10973-016-5628-y
Farid, H., Farzaneh, M., Saeidi, A., & Erchiqui, F. (2016). A contribution to the study of the compressive behavior of atmospheric ice. Cold Regions Science and Technology, 121, 60-65. doi:https://doi.org/10.1016/j.coldregions.2015.10.007
Erchiqui, F., Annasabi, Z., Souli, M., & Slaoui-Hasnaoui, F. (2015). 3D numerical analysis of the thermal effect and dielectric anisotropy on thawing frozen wood using microwave energy. International Journal of Thermal Sciences, 89, 58-78. doi:https://doi.org/10.1016/j.ijthermalsci.2014.09.012
Bravo, A., Koffi, D., Toubal, L., & Erchiqui, F. (2015). Life and damage mode modeling applied to plastic gears. Engineering Failure Analysis, 58(P1), 113-133. doi:https://doi.org/10.1016/j.engfailanal.2015.08.040
Fini, S. H., Erchiqui, F., & Farzaneh, M. (2015). Investigating the elastic deformation of wood-plastic composites at cold temperature using the bubble inflation technique. Journal of Thermoplastic Composite Materials, 28(3), 431-441. doi:https://doi.org/10.1177%2F0892705713515263
Talla, A. S. F., Erchiqui, F., Kaddami, H., & Kocaefe, D. (2015). Investigation of the thermostability of poly(ethylene terephthalate)-hemp fiber composites: Extending natural fiber reinforcements to high-melting thermoplastics. Journal of Applied Polymer Science, 132(37). doi:https://doi.org/10.1002/app.42500
Fini, S. H. A., Farzaneh, M., & Erchiqui, F. (2015). Study of the elastic behaviour of wood–plastic composites at cold temperatures using artificial neural networks. Wood Science and Technology, 49(4), 695-705. doi:https://doi.org/10.1007/s00226-015-0717-9
Erchiqui, F. (2014). Analysis and Evaluation of Power Formulations for Wood and Hardboard Using Radio Frequency and Microwave Energy. Drying Technology, 32(8), 946-959. doi:https://doi.org/10.1080/07373937.2013.875923
Erchiqui, F., Annasabi, Z., Koubaa, A., Kocaefe, D., Slaoui-Hasnaoui, F., & Imad, A. (2014). Numerical investigation on phytosanitary treatment of frozen wood using microwave energy. Canadian Journal of Chemical Engineering, 92(11), 1859-1864. doi:https://doi.org/10.1002/cjce.22060
Erchiqui F., Souli M. (2014). Numerical investigation of vibration and dynamic pressure of a vertical axis wind turbine. International Journal of Multiphysics. 8(4): 421-436.
Tazi, M., Erchiqui, F., Godard, F., Kaddami, H., & Ajji, A. (2014). Characterization of rheological and thermophysical properties of HDPE-wood composite. Journal of Applied Polymer Science, 131(13). doi:https://doi.org/10.1002/app.40495
Erchiqui, F. (2013). 3D Numerical Simulation of Thawing Frozen Wood Using Microwave Energy: Frequency Effect on the Applicability of the Beer-Lambert Law. Drying Technology, 31(11), 1219-1233. doi:https://doi.org/10.1080/07373937.2013.784327
Erchiqui, F. (2013). Analysis of power formulations for the thawing of frozen wood using microwave energy. Chemical Engineering Science, 98, 317-330. doi:https://doi.org/10.1016/j.ces.2013.03.012
Al-Bahkali E. A., Erchiqui F., Moatamedi M., Souli M. (2013). Deployment of a Neo-Hookean Membrane: Experimental and Numerical Analysis. International Journal of Multiphysics. 7(1): 41-51.
Erchiqui, F., Annasabi, Z., Koubaa, A., Slaoui-Hasnaoui, F., & Kaddami, H. (2013). Numerical modelling of microwave heating of frozen wood. Canadian Journal of Chemical Engineering, 91(9), 1582-1589. doi:https://doi.org/10.1002/cjce.21826
Talla, A. S. F., Mfoumou, E., Jeson, S., Pagé, J. S. Y. D., & Erchiqui, F. (2013). Mechanical and structural properties of a novel melt processed PET-hemp composite: Influence of additives and fibers concentration. Journal of Reinforced Plastics and Composites, 32(20), 1526-1533. doi:https://doi.org/10.1177/0731684413494108
Foudil-bey* N; Royer J. J; Cheng L.; Erchiqui F.; Mareschal J. C. (2013). Neural Network Stochastic Simulation Applied for Quantifying Uncertainties. International Journal of Multiphysics. 7(1): 31-40.
Farid* H.; Elgorba M.; Erchiqui F.; M. Chergui; K. Elhad, (2013). Damage Characterization of a thin plate Made of ABS under uniaxial solicitation. International Journal of Engineering and Science. 2(8): 11-17.
Foudil-bey* N; Royer J. J; Cheng L.; Erchiqui F.; Mareschal J. C. (2013). Neural Network Stochastic Simulation Applied for Quantifying Uncertainties. International Journal of Multiphysics. 7(1): 31-40.
Farid* H.; Elghorba M.; Elhadl K.; Erchiqui F.; Chergui M. (2013). Damageable thermal behavior of a thermoplastic flat plate under uniaxial stress. The British journal of mathematics & computer science. 3(4): 527-538
Mabrouk, A. B., Kaddami, H., Boufi, S., Erchiqui, F., & Dufresne, A. (2012). Cellulosic nanoparticles from alfa fibers (Stipa tenacissima): Extraction procedures and reinforcement potential in polymer nanocomposites. Cellulose, 19(3), 843-853. doi:https://doi.org/10.1007/s10570-012-9662-z
Amdi M., Souli M, Hargreaves J., Erchiqui F. (2012). Numerical Investigation of a Vibroacoustic Analysis with Different Formulations, CMES-Computer Modeling in Engineering , Vol.85, No.4, 2012, pp.329-346,
Erchiqui, F., Nahas, N., Nourelfath, M., & Souli, M. (2011). Metaheuristic algorithms for optimisation of infrared heating in thermoforming process. International Journal of Metaheuristics, 1(3), 199-221. doi:https://dx.doi.org/10.1504/IJMHEUR.2011.041194
Erchiqui, F., Ozdemir, Z., Souli, M., Ezzaidi, H., & Dituba-Ngoma, G. (2011). Neural networks approach for characterisation of viscoelastic polymers. Canadian Journal of Chemical Engineering, 89(5), 1303-1310. doi:https://doi.org/10.1002/cjce.20466
Migneault, S., Koubaa, A., Erchiqui, F., Chaala, A., Englund, K., & Wolcott, M. P. (2011). Application of micromechanical models to tensile properties of wood-plastic composites. Wood Science and Technology, 45(3), 521-532. doi:https://doi.org/10.1007/s00226-010-0351-5
Gakwaya A.; Sharifi* H.; Souli M.; Erchiqui F. (2011). ALE formulation and simulation techniques in Integrated Computer Aided Design and Engineering System with industrial metal forming applications. Computer Modeling in Engineering and Sciences. 73(3): 209-266.
Erchiqui, F., Imad, A., Mouloudi, A., & Hsnaoui, F. S. (2010). Caractérisation viscoélastique du comportement d’une membrane thermoplastique et modélisation numérique de thermoformage. Canadian Journal of Chemical Engineering, 88(1), 116-125. doi:https://doi.org/10.1002/cjce.20249
Hasnaoui-Slaoui F.; Erchiqui F. (2010). Evaluation of Grounding and inversion method to estimate soil electrical grounding parameters. International Journal of Multiphysics. 4(3): 201-215.
Erchiqui, F., Godard, F., Gakwaya, A., Koubaa, A., Vincent, M., & Kaddami, H. (2009). Engineering investigations on the potentiality of the thermoformability of HDPE charged by wood flours in the thermoforming part. Polymer Engineering and Science, 49(8), 1594-1602. doi:https://doi.org/10.1002/pen.21394
Erchiqui, F., Godard, F., Koubba, A., Vincent, M., & Kaddami, H. (2009). Investigation of relaxation properties and potentiality of the thermoformability of HDPE charged by wood flours. Journal of Reinforced Plastics and Composites, 28(10), 1163-1168. doi:https://doi.org/10.1177%2F0731684407085431
Erchiqui, F., Hamani, I., & Charette, A. (2009). Modélisation par éléments finis du chauffage infrarouge des membranes thermoplastiques semi-transparentes. International Journal of Thermal Sciences, 48(1), 73-84. doi:https://doi.org/10.1016/j.ijthermalsci.2008.03.007
Erchiqui, F., & Kandil, N. (2009). Erratum: Neuronal networks approach for characterization of softened polymers (Journal of Reinforced Plastics and Composites 25:5 DOI: 10.1177/0731684408101882). Journal of Reinforced Plastics and Composites, 28(2), 248. doi:https://doi.org/10.1177/0731684408101897
Erchiqui, F., & Souli, M. (2009). Numerical investigation of the gas flow temperature on the thermoforming and blow-molding processes. Journal of Reinforced Plastics and Composites, 28(15), 1823-1840. doi:https://doi.org/10.1177%2F0731684408090710
Migneault, S., Koubaa, A., Erchiqui, F., Chaala, A., Englund, K., & Wolcott, M. P. (2009). Effects of processing method and fiber size on the structure and properties of wood-plastic composites. Composites Part A: Applied Science and Manufacturing, 40(1), 80-85. doi:https://doi.org/10.1016/j.compositesa.2008.10.004
Yedder, R. B., & Erchiqui, F. (2009). Convective flow and heat transfer in a tall porous cavity side-cooled with temperature profile. International Journal of Heat and Mass Transfer, 52(25-26), 5712-5718. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2009.08.016
Migneault, S., Koubaa, A., Erchiqui, F., Chaala, A., Englund, K., Krause, C., & Wolcott, M. (2008). Effect of fiber length on processing and properties of extruded wood-fiber/HDPE composites. Journal of Applied Polymer Science, 110(2), 1085-1092. doi:https://doi.org/10.1002/app.28720
Sbiai, A., Kaddami, H., Fleury, E., Maazouz, A., Erchiqui, F., Koubaa, A., Dufresne, A. (2008). Effect of the fiber size on the physicochemical and mechanical properties of composites of epoxy and date palm tree fibers. Macromolecular Materials and Engineering, 293(8), 684-691. doi:https://doi.org/10.1002/mame.200800087
Bendahou, A., Kaddami, H., Sautereau, H., Raihane, M., Erchiqui, F., & Dufresne, A. (2008). Short palm tree fibers poly olefin composites: Effect of filler content and coupling agent on physical properties. Macromolecular Materials and Engineering, 293(2), 140-148. doi:https://doi.org/10.1002/mame.200700315
Erchiqui, F. (2008). Numerical investigation of gas equations of state of the isotropic viscoelastic polymer membrane in free and confined inflation. Journal of Reinforced Plastics and Composites, 27(5), 487-505. doi:https://doi.org/10.1177%2F0731684407081396
Erchiqui, F., & Bendada, A. (2007). Application of the thermodynamical law of gases for modelling of free inflation of the closed thin hyperelastic structure. International Journal of Modelling and Simulation, 27(3), 258-265. doi:https://doi.org/10.1080/02286203.2007.11442425
Ngoma, G. D., & Erchiqui, F. (2007). Heat flux and slip effects on liquid flow in a microchannel. International Journal of Thermal Sciences, 46(11), 1076-1083. doi:https://doi.org/10.1016/j.ijthermalsci.2007.02.001
Erchiqui, F., Souli, M., & Ben Yedder, R. (2007). Nonisothermal finite-element analysis of thermoforming of polyethylene terephthalate sheet: Incomplete effect of the forming stage. Polymer Engineering and Science, 47(12), 2129-2144. doi:https://doi.org/10.1002/pen.20947
Erchiqui, F., & Ngoma, G. D. (2007). Analyse comparative des méthodes de calcul des facteurs de formes pour des surfaces à contours rectilignes. International Journal of Thermal Sciences, 46(3), 284-293. doi:https://doi.org/10.1016/j.ijthermalsci.2006.06.001
Erchiqui, F., & Kandil, N. (2006). Neuronal networks approach for characterization of softened polymers. Journal of Reinforced Plastics and Composites, 25(5), 463-473. doi:https://doi.org/10.1177%2F0731684405056435
Ngoma, G. D., & Erchiqui, F. (2006). Pressure gradient and electroosmotic effects on two immiscible fluids in a microchannel between two parallel plates. Journal of Micromechanics and Microengineering, 16(1), 83-91. doi:https://doi.org/10.1088/0960-1317/16/1/012
Alia, A., Souli, M., & Erchiqui, F. (2006). Variational boundary element acoustic modelling over mixed quadrilateral-triangular element meshes. Communications in Numerical Methods in Engineering, 22(7), 767-780. doi:https://doi.org/10.1002/cnm.848
Erchiqui, F. (2006). A new hybrid approach using the explicit dynamic finite element method and thermodynamic law for the analysis of the thermoforming and blow molding processes for polymer materials. Polymer Engineering and Science, 46(11), 1554-1564. doi:https://doi.org/10.1002/pen.20605
Erchiqui, F. (2006). A new thermodynamical approach for the simulation of thermoforming process using the quasi-static finite element method. Journal of Reinforced Plastics and Composites, 25(3), 235-261. doi:https://doi.org/10.1177%2F0731684406056436
Erchiqui F., Diri D., Bouoyoun M., Bendada A. (2005). Analysis of gas pressure effect during the thermoplastic membrane blowing using the dynamic finite element method. International Journal of Forming Processes. 8(4): 429-450.
Bendada, A., Erchiqui, F., & Kipping, A. (2005). Understanding heat transfer mechanisms during the cooling phase of blow molding using infrared thermography. NDT and E International, 38(6), 433-441. doi:https://doi.org/10.1016/j.ndteint.2004.11.007
Bendada, A., Erchiqui, F., & Lamontagne, M. (2005). Pulsed thermography in the evaluation of an aircraft composite using 3D thermal quadrupoles and mathematical perturbations. Inverse Problems, 21(3), 857-877. doi:https://doi.org/10.1088/0266-5611/21/3/005
Erchiqui, F. (2005). Finite element analysis of transversely isotropic viscoelastic material for thermoforming process. Journal of Reinforced Plastics and Composites, 24(12), 1229-1246. doi:https://doi.org/10.1177%2F0731684405048843
Erchiqui, F. (2005). Thermodynamic approach of inflation process of K-BKZ polymer sheet with respect to thermoforming. Polymer Engineering and Science, 45(10), 1319-1335. doi:https://doi.org/10.1002/pen.20360
Erchiqui, F., Bendada, A., & Gakwaya, A. (2005). Analysis of long fibers direction of transversely isotropic hyperelastic material for thermoforming application. Journal of Reinforced Plastics and Composites, 24(9), 961-975. doi:https://doi.org/10.1177%2F0731684405048196
Erchiqui, F., & Derdouri, A. (2005). Analyse Expérimentale et Numérique du Comportement de Membranes Thermoplastiques en ABS et en Hips dans le Procédé de Thermoformage. Canadian Journal of Chemical Engineering, 83(3), 527-536. doi:https://doi.org/10.1002/cjce.5450830316
Erchiqui, F., Gakwaya, A., & Rachik, M. (2005). Dynamic finite element analysis of nonlinear isotropic hyperelastic and viscoelastic materials for thermoforming applications. Polymer Engineering and Science, 45(1), 125-134. doi:https://doi.org/10.1002/pen.20238
Erchiqui, F., Godard, F., & Yedder, R. B. (2004). Hybrid approach for modeling of parison extrusion in blowmolding. Journal of Polymer Engineering, 24(6), 537-555. doi:https://doi.org/10.1515/POLYENG.2004.24.6.537
Erchiqui, F., & Gakwaya, A. (2003). Modélisation du comportement viscoélastique d’une membrane thermoplastique par la méthode des éléments finis. Revue Europeenne des Elements, 12(1), 43-58. doi:https://doi.org/10.3166/reef.12.43-58
Erchiqui F., Diri* D. (2003). Modélisation du comportement des polymères thermoplastiques par une approche combinant la méthode dynamique des éléments finis et la loi des gaz parfaits. Revue des Composites et des Matériaux Avancés. 3(1): 99-114.
Erchiqui F., Derdouri A., Gakwaya G., Verron E. (2001). Free inflation of flat thermoplastic membrane: numerical analysis and experimental validation. Entropie. 235/236: 118-125.
Laroche, D., & Erchiqui, F. (1999). Experimental and theoretical study of the thermoformability of industrial polymers. Journal of Plastic Film and Sheeting, 15(4), 287-296. doi:https://doi.org/10.1177%2F875608799901500404
Laroche, D., & Erchiqui, F. (2000). Experimental and theoretical study of the thermoformability of industrial polymers. Journal of Reinforced Plastics and Composites, 19(3), 230-239. doi:https://doi.org/10.1177%2F073168440001900303
Charette, A., Erchiqui, F., & Kocaefe, Y. S. (1989). The imaginary planes method for the calculation of radiative heat transfer in industrial furnaces. The Canadian Journal of Chemical Engineering, 67(3), 378-384. doi:https://doi.org/10.1002/cjce.5450670305